The environment is very important for the maintenance of the machine. The top of the list: The environment of the printing studio must always be clean, especially the glass of the printing must be wiped clean before and after work, and secondly: the developing machine must pay attention to regular cleaning and maintenance. The second is to check the voltage and power grid regularly, and this standard should be included in the elegance of its rules to resolutely prevent damage due to excessive voltage or low cost Stenter.
Following the rapid development of screen printing machines across the country. The Gusu pad printing machine quickly became popular, and the machine printing quickly replaced the traditional backward hand printing, and the screen printing machine quickly surpassed the manual printing in terms of craftsmanship, speed and quality. However, in the process of using the screen printing machine, it is inevitable that there will be problems.
Let me talk about the usual protection and maintenance of air compressor components, first and foremost. It is recommended not to use too much water or oil into the air pressure system of the Flat Screen Printing Machine. Preventing this can ensure the cleanliness of the compressed air and extend the life of the cylinder. It is also recommended that every user should check whether the amount of oil in the oil cup in the converter is sufficient every day. In addition to this, it is also necessary to adhere to the horizontal sliding seat of the workbench and the cleaning and oil maintenance of the corresponding fine and highly cooperative components. These maintenance work can effectively prevent the hardware of the components from being affected by rust.